Starrett Tap Wrench - 5/16" to 3/4" Capacity Size

Made in USA

• Starrett Model No. 91D
  
• Tempered gripping surfaces firmly hold square or round shanks
  
• 5/16" to 3/4" Capacity Size
• Round shanks can be gripped, but care must be used. Excessive pressure may break the moveable V-jaw
• Plunger operated by knurled sleeve
• Spring inside sleeve causes plunger to back off when pressure is removed

• Product Description
• Specs

• 
  

    The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 16" (400mm) Length, 5/16-3/4" (8-19mm) Tap Size. *Note round shanks can be gripped, but care must be used. Excessive pressure may break the moveable V-jaw.   Made in USA.
  

• Product	Model #
  Starrett Tap Wrench - 5/16" to 3/4" Capacity Size	91D  | EDP # 50422

   

     For California Residents:

  
  

     WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

  
  

     WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood